CKS THNDR 240W TC STARTER KITCKS
The CKS THNDR Box Mod is powered by the VO Chipset and has variable wattage mode, temperature control mode, and bypass mode. The variable wattage mode has a 5 to 240W output range with an atomizer resistance of 0.1 to 2.0 ohm, and a voltage output of 1 to 8.4V. The temperature control suite supports the use of titanium, nickel, and stainless steel 316 with a range of 200 to 600 degrees Fahrenheit. The gorgeous 1.3 in OLED display screen has a 240 x 240 definition and shows the output mode, output temperature, output power, output voltage, atomizer resistance, and battery life indicator. The THNDR also comes pre-installed with 17 wallpapers; additional wallpaper and software updates can be installed via micro USB port. This box mod has a four button control interface with two firing buttons on either side of the device and two adjustment buttons below the screen. A bottom sliding latch battery door accommodates two 21700, 20700, or 18650 batteries, the latter of which can be used with two hard plastic cases. A fan patterned motif can be seen along the face plate and brass contact point of the device and a 3D raised Fujin plate is placed on the back plate of the THNDR. The CKS THNDR is paired with the Bolt Sub-Ohm Kit, a 25mm diameter tank with 28 maximum bubble glass diameter, and a 6ml e liquid capacity. The knurled top ring has a slide to open top cap with a single fill port. This sub-ohm tank uses the Bolt replacement coil family, and comes with a pre-installed double mesh coil rated at 0.2 ohm and has a range of 60 to 90W. Airflow can be adjusted with the dual 14mm by 3mm bottom air slots. The Bolt comes with a 14mm wide 810 bore frosted acrylic drip tip with the fan patterned motif throughout. The CKS THNDR 240W TC Starter Kit is an high powered combination powered by a highly customizable chip that should be part of every collection.